Armored Republic

A4 Alloy Body Armor

Level III++ (M80A1 at 2,800 FPS) · AR500 Armor

The Armored Republic A4 Alloy Body Armor is a stand-alone steel plate.

Its published rating: “Level III++ (M80A1 at 2,800 FPS)”.

Curvature not stated.

We found no listing for it on NIJ's Compliant Products List; its maker's test claim is quoted below.

In 10 × 12 in shooters cut it weighs 8.40 lb (3.81 kg).

Its maker lists 2 rounds tested, including 7.62×51 M80A1 and 5.56×45 M193.

Armored Republic lists it from $99.00 to $279.00 depending on size.

NIJ level
No NIJ level
Curvature
Curvature not stated
Fit
Unisex
Wear
Stand-alone
NIJ certified
Not on NIJ CPL
Price
$99.00–$279.00
Independent tests
1 by Buffman RANGE

NIJ certification

We found no listing for this plate on NIJ’s Compliant Products List. Checked Nov 11, 2026 against the NIJ CPL.

What Armored Republic says:

"Armored Republic commissioned Energetic Test Labs to do third-party verification of the plate with specific rounds at specific speeds." Stopping power "based on the NIJ's 0101.06 Level III standard".

NIJ suspensions and removals

No NIJ advisory or safety notice names this model. Checked Nov 12, 2026 against NIJ’s notices.

NIJ publishes a notice when it suspends a model from the Compliant Products List or removes it permanently. A closed notice means NIJ finished the review; “CPL today” is the noticed model’s status in our Nov 12, 2026 snapshot of the list.

Sizes, weights and prices

SizeDimensionsWeightThicknessPrice
10 × 12 shootersCurvature not stated · FragLock Base Coat10" x 12"8.40 lb (3.81 kg)9 mm (0.34 in)$199.00
10 × 12 shootersCurvature not stated · FragLock Build-Up10" x 12"8.65 lb (3.92 kg)9 mm (0.34 in)$249.00
11 × 14 shootersCurvature not stated · FragLock Base Coat11" x 14"Not published9 mm (0.34 in)$229.00
11 × 14 shootersCurvature not stated · FragLock Build-Up11" x 14"Not published9 mm (0.34 in)$279.00
6 × 6 otherCurvature not stated · FragLock Base Coat · Sold on the Hard Side Plate page; Armored Republic doesn't publish the side plate's weight.6" x 6"Not published9 mm (0.34 in)$99.00
6 × 6 otherCurvature not stated · FragLock Build-Up · Sold on the Hard Side Plate page; Armored Republic doesn't publish the side plate's weight.6" x 6"Not published9 mm (0.34 in)$139.00

Weights and dimensions as Armored Republic publishes them; prices are Armored Republic’s own store prices.

Rounds tested, as listed by Armored Republic

RoundStandardGrainsVelocity
7.62×51 Enhanced Performance Round (M80A1) at 2,800 ft/s—2800 ft/s (+/- 30)
5.56×45 FMJ (M193) at 3,250 ft/s—3250 ft/s (+/- 30)

A round that isn’t listed isn’t necessarily one the plate fails; it means no source says.

Independent tests by Buffman RANGE

1 test · not NIJ testing · click to expand

Results from Buffman RANGE’s own range tests, used with his permission. This is not NIJ testing, and we haven’t verified it.

Armored Republic A4, Level III+++ /RF2 Armor (AR500 Armor)Video only; no shot table · Aug 4, 2026 · video

Source: Buffman RANGE’s test videos and test summary spreadsheet, used with permission. “His threat class” is his own label for the round, not an NIJ result; this plate’s NIJ certification is shown above, from NIJ’s Compliant Products List.

All specs

Protection

Protection (as published)
Level III++ (M80A1 at 2,800 FPS)
NIJ standard
0101.06
NIJ level
No NIJ level
Stand-alone or ICW
stand-alone
Worn with (ICW)
Not published
Special-threat plate
no
Female-specific model
no
Multi-hit
Edge-to-edge multi-hit protection

Certification

NIJ certified (CPL)
Not on NIJ CPL
CPL standard
Not published
CPL model designation
Not published
CPL checked
Nov 11, 2026
Maker's test claim
"Armored Republic commissioned Energetic Test Labs to do third-party verification of the plate with specific rounds at specific speeds." Stopping power "based on the NIJ's 0101.06 Level III standard".
Other certifications
Not published

Construction

Plate type
steel
Strike face
AR600 custom steel alloy blend
Backer
Not published
Construction / process
AR600 custom steel alloy blend, with FragLock™ Coating
Edge-to-edge protection
yes
Drop protection
yes
Drop protection (basis, as published)
"it can get abused, dropped, and shot, and keep performing."
Cover
FragLock™ Base Coat or Build-Up Coat
Thickness (as published)
0.34″ (Base Coat), 0.55” (Build-Up)
Areal density (as published)
Not published
Weight tolerance
Not published
Buoyancy
Not published

Availability and sources

Status
current
Availability (source wording)
Sold on Armored Republic's own US web store (ar500armor.com).
Product line
AR500 Armor
Warranty
Not published
Country
USA (Phoenix, Arizona)
Origin
United States (where the maker is based)
Data source
Manufacturer (and other official sources)
Primary source
ar500armor.com
Second source
ar500armor.com
Last checked
Nov 11, 2026
Notes and source conflicts
Not on NIJ's CPL under Armored Republic's model names (the CPL's "AR500 Armor" listings are private-label Hesco and RMA plates). "Level III++" is Armored Republic's label. 20-year shelf life. Weights are published for the 10″ x 12″ (default size). The drop claim is marketing wording, not a published drop test. Prices are Armored Republic's store prices per plate.

“Not published” means we couldn’t find a public number, not that the feature is missing. Manufacturer claims can be wrong; confirm them with an independent source to be sure. Spotted an error? Report a correction.

Compare side by side