DFNDR Armor
Level III+ C-G2 (E-IIIPSA-C-G2)
Rifle Rated Level III+ C-G2
The DFNDR Armor Level III+ C-G2 (E-IIIPSA-C-G2) is a Level III stand-alone polyethylene plate.
Curvature: multi curve.
We found no listing for it on NIJ's Compliant Products List; its maker's test claim is quoted below.
In SAPI M it weighs 3.00 lb (1.36 kg).
Its maker lists 2 rounds tested, including 7.62×51 M80 ball and 7.62×39 mild steel core.
DFNDR Armor lists it from $385.00 to $490.00 depending on size.
- NIJ level
- Level III
- Curvature
- Multi curve
- Fit
- Unisex
- Wear
- Stand-alone
- NIJ certified
- Not on NIJ CPL
- Price
- $385.00–$490.00
NIJ certification
We found no listing for this plate on NIJ’s Compliant Products List. Checked Nov 12, 2026 against the NIJ CPL.
What DFNDR Armor says:
independently tested at NIJ Certified Ballistic Lab in a Stand-Alone Configuration
NIJ suspensions and removals
No NIJ advisory or safety notice names this model. Checked Nov 12, 2026 against NIJ’s notices.
NIJ publishes a notice when it suspends a model from the Compliant Products List or removes it permanently. A closed notice means NIJ finished the review; “CPL today” is the noticed model’s status in our Nov 12, 2026 snapshot of the list.
Sizes, weights and prices
| Size | Dimensions | Weight | Thickness | Price |
|---|---|---|---|---|
| SAPI S | 8.75 x 11.75 x 1.1 in. | 2.60 lb (1.18 kg) | 28 mm (1.10 in) | $385.00 |
| 8.75 × 11.75 shooters | 8.75 x 11.75 x 1.1 in. | 2.60 lb (1.18 kg) | 28 mm (1.10 in) | $385.00 |
| SAPI M | 9.5 x 12.5 x 1.1 in. | 3.00 lb (1.36 kg) | 28 mm (1.10 in) | $410.00 |
| 9.5 × 12.5 shooters | 9.5 x 12.5 x 1.1 in. | 3.00 lb (1.36 kg) | 28 mm (1.10 in) | $410.00 |
| 10 × 12 other | 10 x 12 x 1.1 in. | 3.00 lb (1.36 kg) | 28 mm (1.10 in) | $410.00 |
| 10 × 12 shooters | 10 x 12 x 1.1 in. | 3.00 lb (1.36 kg)About the same as SAPI M | 28 mm (1.10 in) | $410.00 |
| SAPI L | 10.25 x 13.25 x 1.1 in. | 3.40 lb (1.54 kg) | 28 mm (1.10 in) | $450.00 |
| 10.25 × 13.25 shooters | 10.25 x 13.25 x 1.1 in. | 3.40 lb (1.54 kg) | 28 mm (1.10 in) | $450.00 |
| SAPI XL | 11 x 14 x 1.1 in. | 3.90 lb (1.77 kg) | 28 mm (1.10 in) | $490.00 |
| 11 × 14 shooters | 11 x 14 x 1.1 in. | 3.90 lb (1.77 kg) | 28 mm (1.10 in) | $490.00 |
Weights and dimensions as DFNDR Armor publishes them; prices are DFNDR Armor’s own store prices. Shooter and swimmer 8×10 and 10×12 sizes are often nominal, so each is compared with this plate's own SAPI S or M weight.
Rounds tested, as listed by DFNDR Armor
| Round | Standard | Grains | Velocity |
|---|---|---|---|
| 7.62x51mm M80 Ball | Maker tested | — | Not published |
| 7.62x39 Mild Steel Core (Chinese) | Maker tested | — | Not published |
| 7.62x39 PS Ball (Russian) | Maker tested | — | Not published |
| Standard lead core .308, 7.62, .223 and 5.56 | Maker tested | — | Not published |
A round that isn’t listed isn’t necessarily one the plate fails; it means no source says.
All specs
Protection
- Protection (as published)
- Rifle Rated Level III+ C-G2
- NIJ standard
- Not published
- NIJ level
- III
- Stand-alone or ICW
- stand-alone
- Worn with (ICW)
- Not published
- Special-threat plate
- no
- Female-specific model
- no
- Multi-hit
- Not published
Certification
- NIJ certified (CPL)
- Not on NIJ CPL
- CPL standard
- Not published
- CPL model designation
- Not published
- CPL checked
- Nov 12, 2026
- Maker's test claim
- independently tested at NIJ Certified Ballistic Lab in a Stand-Alone Configuration
- Other certifications
- Not published
Construction
- Plate type
- polyethylene
- Strike face
- Not published
- Backer
- Not published
- Construction / process
- UHMWPE fiber bound with a resin matrix; Spall-Tek; Trauma Mitigation Base
- Edge-to-edge protection
- not stated
- Drop protection
- not stated
- Drop protection (basis, as published)
- Not published
- Cover
- Not published
- Thickness (as published)
- Not published
- Areal density (as published)
- Not published
- Weight tolerance
- Not published
- Buoyancy
- Not published
Availability and sources
- Status
- current
- Availability (source wording)
- Sold on DFNDR Armor's own web store.
- Product line
- Not published
- Warranty
- Not published
- Country
- Not published
- Origin
- Not published
- Data source
- Manufacturer (and other official sources)
- Primary source
- dfndrarmor.com
- Second source
- None
- Last checked
- Nov 12, 2026
- Notes and source conflicts
- From DFNDR Armor's product page; sizes, thickness and weights from the store's size options, prices per torso plate (sold individually). DFNDR calls the curvature multi-curve; side plates single curve. Threats tested at muzzle velocity. Not on NIJ's CPL under E-IIIPSA-C-G2 (the earlier E-IIIPSA-C is listed). Not on NIJ's CPL under this model.
“Not published” means we couldn’t find a public number, not that the feature is missing. Manufacturer claims can be wrong; confirm them with an independent source to be sure. Spotted an error? Report a correction.