DFNDR Armor
Level III+ ICW Elite (E-IIIPICW-E)
Level III+ In-Conjunction-With (ICW) Ultra Lightweight
The DFNDR Armor Level III+ ICW Elite (E-IIIPICW-E) is a Level III polyethylene plate, worn with Level IIIA soft armor (SLXIIIA, SLHIIIA, E-IIIA-S).
Curvature: multi curve.
We found no listing for it on NIJ's Compliant Products List; its maker's test claim is quoted below.
In SAPI M it weighs 1.58 lb (0.72 kg).
Its maker lists 2 rounds tested, including 7.62×51 M80 ball and 7.62×39 mild steel core.
DFNDR Armor lists it from $645.00 to $1,290.00 depending on size.
- NIJ level
- Level III
- Curvature
- Multi curve
- Fit
- Unisex
- Wear
- ICW (with soft armor)
- NIJ certified
- Not on NIJ CPL
- Price
- $645.00–$1,290.00
NIJ certification
We found no listing for this plate on NIJ’s Compliant Products List. Checked Nov 12, 2026 against the NIJ CPL.
What DFNDR Armor says:
Independently tested at an NIJ Certified Ballistic Laboratory, in conjunction with soft armor models SLXIIIA, SLHIIIA and E-IIIA-S
NIJ suspensions and removals
No NIJ advisory or safety notice names this model. Checked Nov 12, 2026 against NIJ’s notices.
NIJ publishes a notice when it suspends a model from the Compliant Products List or removes it permanently. A closed notice means NIJ finished the review; “CPL today” is the noticed model’s status in our Nov 12, 2026 snapshot of the list.
Sizes, weights and prices
| Size | Dimensions | Weight | Thickness | Price |
|---|---|---|---|---|
| 5 × 8 other | 5 x 8 x 0.40 in. | 0.51 lb (0.23 kg) | 10 mm (0.40 in) | $645.00 |
| 5 × 8 shooters | 5 x 8 x 0.40 in. | 0.51 lb (0.23 kg) | 10 mm (0.40 in) | $645.00 |
| 7 × 9 other | 7 x 9 x 0.40 in. | 0.81 lb (0.37 kg) | 10 mm (0.40 in) | $760.00 |
| 7 × 9 shooters | 7 x 9 x 0.40 in. | 0.81 lb (0.37 kg) | 10 mm (0.40 in) | $760.00 |
| 8 × 10 other | 8 x 10 x 0.40 in. | 1.06 lb (0.48 kg) | 10 mm (0.40 in) | $920.00 |
| 8 × 10 shooters | 8 x 10 x 0.40 in. | 1.06 lb (0.48 kg) | 10 mm (0.40 in) | $920.00 |
| 9 × 11 other | 9 x 11 x 0.40 in. | 1.37 lb (0.62 kg) | 10 mm (0.40 in) | $955.00 |
| 9 × 11 shooters | 9 x 11 x 0.40 in. | 1.37 lb (0.62 kg) | 10 mm (0.40 in) | $955.00 |
| SAPI M | 9.5 x 12.5 x 0.40 in. | 1.58 lb (0.72 kg) | 10 mm (0.40 in) | $1,155.00 |
| 9.5 × 12.5 shooters | 9.5 x 12.5 x 0.40 in. | 1.58 lb (0.72 kg) | 10 mm (0.40 in) | $1,155.00 |
| 10 × 12 other | 10 x 12 x 0.40 in. | 1.59 lb (0.72 kg) | 10 mm (0.40 in) | $1,035.00 |
| 10 × 12 shooters | 10 x 12 x 0.40 in. | 1.59 lb (0.72 kg)1% heavier than SAPI M | 10 mm (0.40 in) | $1,035.00 |
| 10 × 13 other | 10 x 13 x 0.40 in. | 1.81 lb (0.82 kg) | 10 mm (0.40 in) | $1,185.00 |
| 10 × 13 shooters | 10 x 13 x 0.40 in. | 1.81 lb (0.82 kg) | 10 mm (0.40 in) | $1,185.00 |
| SAPI XL | 11 x 14 x 0.40 in. | 2.05 lb (0.93 kg) | 10 mm (0.40 in) | $1,290.00 |
| 11 × 14 shooters | 11 x 14 x 0.40 in. | 2.05 lb (0.93 kg) | 10 mm (0.40 in) | $1,290.00 |
Weights and dimensions as DFNDR Armor publishes them; prices are DFNDR Armor’s own store prices. Shooter and swimmer 8×10 and 10×12 sizes are often nominal, so each is compared with this plate's own SAPI S or M weight.
Rounds tested, as listed by DFNDR Armor
| Round | Standard | Grains | Velocity |
|---|---|---|---|
| 7.62x51mm M80 Ball | ICW | — | Not published |
| 7.62x39mm Russian PS Ball | ICW | — | Not published |
| 7.62x39mm Chinese Mild Steel Core | ICW | — | Not published |
A round that isn’t listed isn’t necessarily one the plate fails; it means no source says.
All specs
Protection
- Protection (as published)
- Level III+ In-Conjunction-With (ICW) Ultra Lightweight
- NIJ standard
- Not published
- NIJ level
- III
- Stand-alone or ICW
- icw
- Worn with (ICW)
- Level IIIA soft armor (SLXIIIA, SLHIIIA, E-IIIA-S)
- Special-threat plate
- no
- Female-specific model
- no
- Multi-hit
- Not published
Certification
- NIJ certified (CPL)
- Not on NIJ CPL
- CPL standard
- Not published
- CPL model designation
- Not published
- CPL checked
- Nov 12, 2026
- Maker's test claim
- Independently tested at an NIJ Certified Ballistic Laboratory, in conjunction with soft armor models SLXIIIA, SLHIIIA and E-IIIA-S
- Other certifications
- Not published
Construction
- Plate type
- polyethylene
- Strike face
- Not published
- Backer
- Not published
- Construction / process
- UHMWPE fiber; Trauma Mitigation Base; Spall-Tek
- Edge-to-edge protection
- not stated
- Drop protection
- not stated
- Drop protection (basis, as published)
- Not published
- Cover
- Not published
- Thickness (as published)
- Not published
- Areal density (as published)
- Not published
- Weight tolerance
- Not published
- Buoyancy
- Not published
Availability and sources
- Status
- current
- Availability (source wording)
- Sold on DFNDR Armor's own web store.
- Product line
- Not published
- Warranty
- Not published
- Country
- Not published
- Origin
- Not published
- Data source
- Manufacturer (and other official sources)
- Primary source
- dfndrarmor.com
- Second source
- None
- Last checked
- Nov 12, 2026
- Notes and source conflicts
- From DFNDR Armor's product page; sizes, thickness and weights from the store's size options, prices per torso plate (sold individually). DFNDR calls the curvature multi-curve; side plates single curve. Threats tested at muzzle velocity. ICW with Level IIIA soft armor (SLXIIIA, SLHIIIA, E-IIIA-S). Not on NIJ's CPL under this model.
“Not published” means we couldn’t find a public number, not that the feature is missing. Manufacturer claims can be wrong; confirm them with an independent source to be sure. Spotted an error? Report a correction.