DFNDR Armor

Level IIIA Handgun Rated (E-IIIASA-G2)

Handgun Rated Level IIIA

The DFNDR Armor Level IIIA Handgun Rated (E-IIIASA-G2) is a Level IIIA stand-alone polyethylene plate.

Curvature: single or multi curve.

We found no listing for it on NIJ's Compliant Products List; its maker's test claim is quoted below.

In SAPI M it weighs 0.96 lb (0.43 kg).

DFNDR Armor lists it from $135.00 to $210.00 depending on size.

NIJ level
Level IIIA
Curvature
Single or multi curve
Fit
Unisex
Wear
Stand-alone
NIJ certified
Not on NIJ CPL
Price
$135.00–$210.00

NIJ certification

We found no listing for this plate on NIJ’s Compliant Products List. Checked Nov 12, 2026 against the NIJ CPL.

What DFNDR Armor says:

independently tested to the NIJ 0101.04 protocol at NIJ Certified Ballistic Labs

NIJ suspensions and removals

No NIJ advisory or safety notice names this model. Checked Nov 12, 2026 against NIJ’s notices.

NIJ publishes a notice when it suspends a model from the Compliant Products List or removes it permanently. A closed notice means NIJ finished the review; “CPL today” is the noticed model’s status in our Nov 12, 2026 snapshot of the list.

Sizes, weights and prices

SizeDimensionsWeightThicknessPrice
8 × 10 otherMulti curve8 x 10 x 0.60 in.0.65 lb (0.29 kg)15 mm (0.60 in)$135.00
SAPI SMulti curve8.75 x 11.75 x 0.60 in.0.84 lb (0.38 kg)15 mm (0.60 in)$140.00
8.75 × 11.75 shootersMulti curve8.75 x 11.75 x 0.60 in.0.84 lb (0.38 kg)15 mm (0.60 in)$140.00
SAPI MMulti curve9.5 x 12.5 x 0.60 in.0.96 lb (0.43 kg)15 mm (0.60 in)$165.00
9.5 × 12.5 shootersMulti curve9.5 x 12.5 x 0.60 in.0.96 lb (0.43 kg)15 mm (0.60 in)$165.00
10 × 12 otherMulti curve10 x 12 x 0.60 in.0.96 lb (0.43 kg)15 mm (0.60 in)$165.00
10 × 12 shootersMulti curve10 x 12 x 0.60 in.0.96 lb (0.43 kg)About the same as SAPI M15 mm (0.60 in)$165.00
SAPI LMulti curve10.25 x 13.25 x 0.60 in.1.10 lb (0.50 kg)15 mm (0.60 in)$190.00
10.25 × 13.25 shootersMulti curve10.25 x 13.25 x 0.60 in.1.10 lb (0.50 kg)15 mm (0.60 in)$190.00
SAPI XLMulti curve11 x 14 x 0.60 in.1.25 lb (0.57 kg)15 mm (0.60 in)$210.00
11 × 14 shootersMulti curve11 x 14 x 0.60 in.1.25 lb (0.57 kg)15 mm (0.60 in)$210.00
8 × 10 shootersMulti curve8 x 10 x 0.60 in.0.65 lb (0.29 kg)23% lighter than SAPI S15 mm (0.60 in)$135.00
6 × 6 otherSingle curve · Side plates sold as a set of 2 ($190.00 per set).6 x 6 in.0.32 lb (0.14 kg)Not publishedNot listed
6 × 7 otherSingle curve · Side plates sold as a set of 2 ($200.00 per set).6 x 7 in.0.36 lb (0.16 kg)Not publishedNot listed
6 × 8 otherSingle curve · Side plates sold as a set of 2 ($210.00 per set).6 x 8 in.0.40 lb (0.18 kg)Not publishedNot listed
7 × 8 otherSingle curve · Side plates sold as a set of 2 ($210.00 per set).7 x 8 in.0.44 lb (0.20 kg)Not publishedNot listed

Weights and dimensions as DFNDR Armor publishes them; prices are DFNDR Armor’s own store prices. Shooter and swimmer 8×10 and 10×12 sizes are often nominal, so each is compared with this plate's own SAPI S or M weight.

Rounds tested, as listed by DFNDR Armor

RoundStandardGrainsVelocity
.44 magnumMaker tested—Not published

A round that isn’t listed isn’t necessarily one the plate fails; it means no source says.

All specs

Protection

Protection (as published)
Handgun Rated Level IIIA
NIJ standard
Not published
NIJ level
IIIA
Stand-alone or ICW
stand-alone
Worn with (ICW)
Not published
Special-threat plate
no
Female-specific model
no
Multi-hit
Not published

Certification

NIJ certified (CPL)
Not on NIJ CPL
CPL standard
Not published
CPL model designation
Not published
CPL checked
Nov 12, 2026
Maker's test claim
independently tested to the NIJ 0101.04 protocol at NIJ Certified Ballistic Labs
Other certifications
Not published

Construction

Plate type
polyethylene
Strike face
Not published
Backer
Not published
Construction / process
UHMWPE fiber bound with a resin matrix; Spall-Tek; Trauma Mitigation Base
Edge-to-edge protection
not stated
Drop protection
not stated
Drop protection (basis, as published)
Not published
Cover
Not published
Thickness (as published)
Not published
Areal density (as published)
Not published
Weight tolerance
Not published
Buoyancy
Not published

Availability and sources

Status
current
Availability (source wording)
Sold on DFNDR Armor's own web store.
Product line
Not published
Warranty
Not published
Country
Not published
Origin
Not published
Data source
Manufacturer (and other official sources)
Primary source
dfndrarmor.com
Second source
dfndrarmor.com
Last checked
Nov 12, 2026
Notes and source conflicts
From DFNDR Armor's product page; sizes, thickness and weights from the store's size options, prices per torso plate (sold individually). DFNDR calls the curvature multi-curve; side plates single curve. Threats tested at muzzle velocity. Not on NIJ's CPL under this model.

“Not published” means we couldn’t find a public number, not that the feature is missing. Manufacturer claims can be wrong; confirm them with an independent source to be sure. Spotted an error? Report a correction.

Compare side by side