Hesco
4101
Level IV • Stand Alone · 100 Series
The Hesco 4101 is a Level IV stand-alone plate.
Curvature: single curve.
We found no listing for it on NIJ's Compliant Products List; its maker's test claim is quoted below.
In 6 × 8 in other cut it weighs 2.60 lb (1.18 kg).
Its maker lists 12 rounds tested, including 5.56×45 M193, 7.62×39 ball and 7.62×51 M80 ball.
Hesco doesn't publish a price for it.
- NIJ level
- Level IV
- Curvature
- Single curve
- Fit
- Unisex
- Wear
- Stand-alone
- NIJ certified
- Not on NIJ CPL
- Price
- Not published by manufacturer
NIJ certification
We found no listing for this plate on NIJ’s Compliant Products List. Checked Nov 11, 2026 against the NIJ CPL.
What Hesco says:
Matrix shows the minimum number of shots that each size plate can be expected to defeat under NIJ testing methods.
NIJ suspensions and removals
No NIJ advisory or safety notice names this model. Checked Nov 12, 2026 against NIJ’s notices.
NIJ publishes a notice when it suspends a model from the Compliant Products List or removes it permanently. A closed notice means NIJ finished the review; “CPL today” is the noticed model’s status in our Nov 12, 2026 snapshot of the list.
Sizes, weights and prices
| Size | Dimensions | Weight | Thickness | Price |
|---|---|---|---|---|
| 6 × 8 other | 6.00 x 8.00 in | 2.60 lb (1.18 kg) | 30 mm (1.18 in) | Not listed |
| 6 × 6 other | 6.00 x 6.00 in | 1.90 lb (0.86 kg) | 30 mm (1.18 in) | Not listed |
Weights and dimensions as Hesco publishes them; prices are Hesco’s own store prices.
Rounds tested, as listed by Hesco
| Round | Standard | Grains | Velocity |
|---|---|---|---|
| 5.56 x 45 mm – M193 | — | 3280 ft/s | |
| 7.62 x 39 mm - M67 | — | 2410 ft/s | |
| 7.62 x 51 mm – M80 | — | 2810 ft/s | |
| 7.62 x 63 mm – JSP | — | 2794 ft/s | |
| 5.56 x 45 mm - M855/SS109 | — | 3150 ft/s | |
| 7.62 x 39 mm – M43 | — | 2410 ft/s | |
| 7.62 x 54R – LPS | — | 2832 ft/s | |
| 5.56 x 45 mm - M855A1 | — | 3180 ft/s | |
| 7.62 x 39 mm - API | — | 2410 ft/s | |
| 7.62 x 54R B-32 - API | — | 2850 ft/s | |
| 7.62 x 51 mm – M61 | — | 2830 ft/s | |
| 7.62 x 63 mm – AP M2 | — | 2910 ft/s |
A round that isn’t listed isn’t necessarily one the plate fails; it means no source says.
All specs
Protection
- Protection (as published)
- Level IV • Stand Alone
- NIJ standard
- Not published
- NIJ level
- IV
- Stand-alone or ICW
- stand-alone
- Worn with (ICW)
- Not published
- Special-threat plate
- no
- Female-specific model
- no
- Multi-hit
- One shot per round (Hesco's threat matrix)
Certification
- NIJ certified (CPL)
- Not on NIJ CPL
- CPL standard
- Not published
- CPL model designation
- Not published
- CPL checked
- Nov 11, 2026
- Maker's test claim
- Matrix shows the minimum number of shots that each size plate can be expected to defeat under NIJ testing methods.
- Other certifications
- Not published
Construction
- Plate type
- Not published
- Strike face
- Not published
- Backer
- Not published
- Construction / process
- Advanced composite materials (Hesco 100 Series page)
- Edge-to-edge protection
- not stated
- Drop protection
- not stated
- Drop protection (basis, as published)
- Not published
- Cover
- Water-resistant polyurethane coated Cordura® fabric finish
- Thickness (as published)
- 1.18 in (30 mm)
- Areal density (as published)
- 9.08 lb/ft2
- Weight tolerance
- Not published
- Buoyancy
- Not published
Availability and sources
- Status
- current
- Availability (source wording)
- No online store or prices; Hesco's site asks buyers to get in touch.
- Product line
- 100 Series
- Warranty
- Not published
- Country
- USA (Aberdeen, Washington)
- Origin
- United States (where the maker is based)
- Data source
- Manufacturer (and other official sources)
- Primary source
- hescoarmor.com
- Second source
- hescoarmor.com
- Last checked
- Nov 11, 2026
- Notes and source conflicts
- Not on NIJ's CPL. Hesco doesn't publish materials per model (the series material is shown), prices, warranty, grains or edge-to-edge coverage.
“Not published” means we couldn’t find a public number, not that the feature is missing. Manufacturer claims can be wrong; confirm them with an independent source to be sure. Spotted an error? Report a correction.