Hesco
4401
4401 - LEVEL IV STAND ALONE (NIJ LEVEL IV, STAND ALONE, FULL SPECTRUM PROTECTION) · 400 Series · Discontinued
The Hesco 4401 is a Level IV stand-alone ceramic composite plate.
It has been discontinued by Hesco.
Curvature: single curve.
Its NIJ 0101.06 listing on the Compliant Products List (4401) is inactive.
In 10 × 12 in shooters cut it weighs 7.50 lb (3.40 kg).
Its maker lists 11 rounds tested, including 5.56×45 M193, 7.62×39 ball and 7.62×51 M80 ball.
Hesco doesn't publish a price for it.
- NIJ level
- Level IV
- Curvature
- Single curve
- Fit
- Unisex
- Wear
- Stand-alone
- NIJ certified
- Inactive listing, NIJ 0101.06
- Price
- Not published by manufacturer
NIJ certification
On NIJ’s Compliant Products List for NIJ 0101.06 as 4401, but the listing is Inactive. Checked Nov 11, 2026 against the NIJ CPL.
What Hesco says:
NIJ Standard-0101.06: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard-0101.06 plus Special Rife Threats validated
NIJ suspensions and removals
No NIJ advisory or safety notice names this model (or its CPL designation 4401). Checked Nov 12, 2026 against NIJ’s notices.
NIJ publishes a notice when it suspends a model from the Compliant Products List or removes it permanently. A closed notice means NIJ finished the review; “CPL today” is the noticed model’s status in our Nov 12, 2026 snapshot of the list.
Sizes, weights and prices
| Size | Dimensions | Weight | Thickness | Price |
|---|---|---|---|---|
| 10 × 12 shooters | 10.0 x 12.0 in | 7.50 lb (3.40 kg) | 21 mm (0.83 in) | Not listed |
| 8 × 10 shooters | 8.0 x 10.0 in | 4.90 lb (2.22 kg) | 21 mm (0.83 in) | Not listed |
| 10 × 12 full | 10.0 x 12.0 in | 8.40 lb (3.81 kg) | 21 mm (0.83 in) | Not listed |
| 8 × 10 full | 8.0 x 10.0 in | 5.40 lb (2.45 kg) | 21 mm (0.83 in) | Not listed |
Weights and dimensions as Hesco publishes them; prices are Hesco’s own store prices. This plate is discontinued, so no current price is shown.
Rounds tested, as listed by Hesco
| Round | Standard | Grains | Velocity |
|---|---|---|---|
| 5.56 x 45 mm – MI93, Max Velocity 3150 ft/s (960 m/s) | — | 3150 ft/s | |
| 7.62 x 39 mm - M67, Max Velocity 2390 ft/s (728 m/s) | — | 2390 ft/s | |
| 7.62 x 51 mm – M80 *, Max Velocity 2800 ft/s (853 m/s) | — | 2800 ft/s | |
| 7.62 x 63 mm – JSP, Max Velocity 2780 ft/s (847 m/s) | — | 2780 ft/s | |
| 5.56 x 45 mm - M855/SS109, Max Velocity 3150 ft/s (960 m/s) | — | 3150 ft/s | |
| 7.62 x 39 mm – M43, Max Velocity 2390 ft/s (728 m/s) | — | 2390 ft/s | |
| 7.62 x 54R – LPS, Max Velocity 2850 ft/s (869 m/s) | — | 2850 ft/s | |
| 7.62 x 39 mm - API, Max Velocity 2390 ft/s (728 m/s) | — | 2390 ft/s | |
| 7.62 x 54R B-32 - API, Max Velocity 2850 ft/s (869 m/s) | — | 2850 ft/s | |
| 7.62 x 51 mm – M61, Max Velocity 2830 ft/s (863 m/s) | — | 2830 ft/s | |
| 7.62 x 63 mm – AP M2 **, Max Velocity 2900 ft/s (884 m/s) | — | 2900 ft/s |
A round that isn’t listed isn’t necessarily one the plate fails; it means no source says.
All specs
Protection
- Protection (as published)
- 4401 - LEVEL IV STAND ALONE (NIJ LEVEL IV, STAND ALONE, FULL SPECTRUM PROTECTION)
- NIJ standard
- 0101.06
- NIJ level
- IV
- Stand-alone or ICW
- stand-alone
- Worn with (ICW)
- Not published
- Special-threat plate
- no
- Female-specific model
- no
- Multi-hit
- Hesco's threat matrix gives 1 to 6 shots per round, depending on round and size
Certification
- NIJ certified (CPL)
- Inactive listing, NIJ 0101.06
- CPL standard
- 0101.06
- CPL model designation
- 4401
- CPL checked
- Nov 11, 2026
- Maker's test claim
- NIJ Standard-0101.06: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard-0101.06 plus Special Rife Threats validated
- Other certifications
- Not published
Construction
- Plate type
- ceramic composite
- Strike face
- Not published
- Backer
- Not published
- Construction / process
- Ceramic/composite design ("COST EFFICIENT CERAMIC/COMPOSITE DESIGN")
- Edge-to-edge protection
- not stated
- Drop protection
- not stated
- Drop protection (basis, as published)
- Not published
- Cover
- Water repellant polyurethane coated CORDURA® fabric finish; also available with sprayed-on polyurea coating (400 Series page)
- Thickness (as published)
- 0.83 inches / 24 mm
- Areal density (as published)
- Not published
- Weight tolerance
- All weights are ± 5%
- Buoyancy
- Not published
Availability and sources
- Status
- discontinued
- Availability (source wording)
- Was listed on hesco.com (no online store; sold through dealers).
- Product line
- 400 Series
- Warranty
- Not published
- Country
- Made in the U.S.A. (Hesco Armor, Aberdeen, Washington)
- Origin
- United States (made there)
- Data source
- Manufacturer (and other official sources)
- Primary source
- web.archive.org
- Second source
- web.archive.org
- Last checked
- Nov 11, 2026
- Notes and source conflicts
- Discontinued: on Hesco's 400 Series page from 2020 to early 2021 (sizes here are from the snapshot archived on 2021-02-28); later snapshots only mention it as the plate the non-certified 4400MC is a version of. Rounds are from Hesco's 400 Series technical specifications (19SEP05PT005_4401, dated 2019-09-05, archived 2022-08-18). Sources disagree on thickness: the page's size table says "0.83 inches / 24 mm" and its summary "0.93"/24mm"; the spec sheet says "0.83 in (21 mm)" (0.83 in is 21 mm, used here). They also disagree slightly on weights (see each size). The page labels the 4401's part numbers "4400-SH-SC-L" etc.; the spec sheet uses "4401-SH-SC-L". Velocities are Hesco's "Max Velocity". The matrix marks M80 "* NIJ Level III Certification Threat" and AP M2 "** NIJ Level IV Certification Threat". NIJ's 0101.06 CPL lists 4401 (Hard (Single Curve)) as Inactive.
“Not published” means we couldn’t find a public number, not that the feature is missing. Manufacturer claims can be wrong; confirm them with an independent source to be sure. Spotted an error? Report a correction.