HighCom

34i1

Level III/IV ICW Level IIIA Soft Armor (High-Velocity Rifle Rounds and Armor Piercing Threats) · Icon Range · Discontinued

The HighCom 34i1 is a Level IV ICW ceramic composite plate, worn with Level IIIA soft armor.

It has been discontinued by HighCom.

Curvature: single curve.

We found no listing for it on NIJ's Compliant Products List; its maker's test claim is quoted below.

In SAPI M it weighs 7.40 lb (3.36 kg).

Its maker lists 2 rounds tested, including 7.62×51 M80 ball and .30-06 M2 AP.

HighCom doesn't publish a price for it.

NIJ level
Level IV
Curvature
Single curve
Fit
Unisex
Wear
ICW (with soft armor)
NIJ certified
Not on NIJ CPL
Price
Not published by manufacturer

NIJ certification

We found no listing for this plate on NIJ’s Compliant Products List. Checked Nov 10, 2026 against the NIJ CPL.

What HighCom says:

NIJ Standard 0101.06 TESTED: This product has been independently tested by an NVLAP accredited NIJ approved laboratory to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06.

NIJ suspensions and removals

No NIJ advisory or safety notice names this model. Checked Nov 12, 2026 against NIJ’s notices.

NIJ publishes a notice when it suspends a model from the Compliant Products List or removes it permanently. A closed notice means NIJ finished the review; “CPL today” is the noticed model’s status in our Nov 12, 2026 snapshot of the list.

Sizes, weights and prices

SizeDimensionsWeightThicknessPrice
5 × 7 fullSingle curve5 x 7 in2.30 lb (1.04 kg)22 mm (0.85 in)Not listed
5 × 8 fullSingle curve5 x 8 in2.70 lb (1.23 kg)22 mm (0.85 in)Not listed
6 × 6 fullSingle curve6 x 6 in2.20 lb (1.00 kg)22 mm (0.85 in)Not listed
6 × 8 fullSingle curve6 x 8 in3.10 lb (1.41 kg)22 mm (0.85 in)Not listed
8 × 10 fullSingle curve8 x 10 in5.20 lb (2.36 kg)22 mm (0.85 in)Not listed
8 × 10 shootersSingle curve8 x 10 in5.00 lb (2.27 kg)22% lighter than SAPI S22 mm (0.85 in)Not listed
10 × 12 fullSingle curve10 x 12 in7.70 lb (3.49 kg)22 mm (0.85 in)Not listed
10 × 12 shootersSingle curve10 x 12 in6.50 lb (2.95 kg)12% lighter than SAPI M · likely undersized22 mm (0.85 in)Not listed
10 × 12 swimmersSingle curve10 x 12 in6.90 lb (3.13 kg)7% lighter than SAPI M22 mm (0.85 in)Not listed
SAPI XSSingle curve7.25 x 11.5 in5.00 lb (2.27 kg)22 mm (0.85 in)Not listed
SAPI SSingle curve8.75 x 11.75 in6.40 lb (2.90 kg)22 mm (0.85 in)Not listed
SAPI MSingle curve9.5 x 12.5 in7.40 lb (3.36 kg)22 mm (0.85 in)Not listed
SAPI LSingle curve10 x 13.25 in8.40 lb (3.81 kg)22 mm (0.85 in)Not listed
SAPI XLSingle curve11 x 14 in9.30 lb (4.22 kg)22 mm (0.85 in)Not listed

Weights and dimensions as HighCom publishes them; prices are HighCom’s own store prices. Shooter and swimmer 8×10 and 10×12 sizes are often nominal, so each is compared with this plate's own SAPI S or M weight. This plate is discontinued, so no current price is shown.

Rounds tested, as listed by HighCom

RoundStandardGrainsVelocity
7.62 mm FMJ, Steel Jacketed Bullets (M80)NIJ 0101.061472780 ft/s (+/- 30)
.30 Caliber Armor Piercing (AP) Bullets (M2 AP)NIJ 0101.061662880 ft/s (+/- 30)

A round that isn’t listed isn’t necessarily one the plate fails; it means no source says.

All specs

Protection

Protection (as published)
Level III/IV ICW Level IIIA Soft Armor (High-Velocity Rifle Rounds and Armor Piercing Threats)
NIJ standard
0101.06
NIJ level
IV
Stand-alone or ICW
icw
Worn with (ICW)
Level IIIA soft armor
Special-threat plate
no
Female-specific model
no
Multi-hit
Not published

Certification

NIJ certified (CPL)
Not on NIJ CPL
CPL standard
Not published
CPL model designation
Not published
CPL checked
Nov 10, 2026
Maker's test claim
NIJ Standard 0101.06 TESTED: This product has been independently tested by an NVLAP accredited NIJ approved laboratory to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06.
Other certifications
Not published

Construction

Plate type
ceramic composite
Strike face
Ceramic
Backer
UHMWPE
Construction / process
Ceramic + UHMWPE
Edge-to-edge protection
not stated
Drop protection
not stated
Drop protection (basis, as published)
Not published
Cover
1000D Cordura, textured nylon
Thickness (as published)
0.85” ("Thinness" on HighCom's spec list)
Areal density (as published)
Not published
Weight tolerance
Not published
Buoyancy
Not published

Availability and sources

Status
discontinued
Availability (source wording)
Was sold on HighCom's own US web store; no longer listed.
Product line
Icon Range
Warranty
5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship
Country
Not published
Origin
United States (where the maker is based)
Data source
Manufacturer (and other official sources)
Primary source
web.archive.org
Second source
None
Last checked
Nov 10, 2026
Notes and source conflicts
Discontinued: no longer on HighCom's site; specs are from HighCom's own page as archived on 2026-02-15. No current price. HighCom labels it "Level III/IV"; its rounds table lists NIJ 0101.06 M80 and M2 AP, so the NIJ level here is IV (ICW).

“Not published” means we couldn’t find a public number, not that the feature is missing. Manufacturer claims can be wrong; confirm them with an independent source to be sure. Spotted an error? Report a correction.

Compare side by side