HighCom

4sas7

Level IV stand alone · Icon Range

The HighCom 4sas7 is a Level IV stand-alone ceramic composite plate.

Curvature: single or multi curve.

We found no listing for it on NIJ's Compliant Products List; its maker's test claim is quoted below.

In SAPI M it weighs 8.70 lb (3.95 kg).

Its maker lists 6 rounds tested, including .30-06 M2 AP, .223 Tactical Bonded Soft Point and 5.56×45 M855 (green tip).

HighCom lists it from $195.00 to $310.00 depending on size.

NIJ level
Level IV
Curvature
Single or multi curve
Fit
Unisex
Wear
Stand-alone
NIJ certified
Not on NIJ CPL
Price
$195.00–$310.00

NIJ certification

We found no listing for this plate on NIJ’s Compliant Products List. Checked Nov 10, 2026 against the NIJ CPL.

What HighCom says:

The 4sas7 is certified compliant by NIJ to NIJ Standard 0101.04 (2005IR).

NIJ suspensions and removals

No NIJ advisory or safety notice names this model. Checked Nov 12, 2026 against NIJ’s notices.

NIJ publishes a notice when it suspends a model from the Compliant Products List or removes it permanently. A closed notice means NIJ finished the review; “CPL today” is the noticed model’s status in our Nov 12, 2026 snapshot of the list.

Sizes, weights and prices

SizeDimensionsWeightThicknessPrice
5 × 7 fullSingle curve5" x 7"2.60 lb (1.18 kg)19 mm (0.75 in)Not listed
5 × 8 fullSingle curve5" x 8"3.00 lb (1.36 kg)19 mm (0.75 in)Not listed
6 × 6 fullSingle curve6" x 6"2.50 lb (1.13 kg)19 mm (0.75 in)$195.00
6 × 8 fullSingle curve6" x 8"3.50 lb (1.59 kg)19 mm (0.75 in)Not listed
8 × 10 fullSingle curve8" x 10"5.80 lb (2.63 kg)19 mm (0.75 in)Not listed
8 × 10 shootersSingle curve8" x 10"5.60 lb (2.54 kg)25% lighter than SAPI S19 mm (0.75 in)Not listed
10 × 12 fullSingle curve10" x 12"8.60 lb (3.90 kg)19 mm (0.75 in)Not listed
10 × 12 shootersSingle curve10" x 12"7.20 lb (3.27 kg)17% lighter than SAPI M · likely undersized19 mm (0.75 in)$264.00
10 × 12 swimmersSingle curve10" x 12"7.60 lb (3.45 kg)13% lighter than SAPI M · likely undersized19 mm (0.75 in)Not listed
10 × 12 shootersMulti curve10" x 12"7.20 lb (3.27 kg)17% lighter than SAPI M · likely undersized19 mm (0.75 in)$275.00
SAPI XSMulti curve7¼" x 11½"6.00 lb (2.72 kg)19 mm (0.75 in)Not listed
SAPI SMulti curve8¾" x 11¾"7.50 lb (3.40 kg)19 mm (0.75 in)$275.00
SAPI MMulti curve9½" x 12½"8.70 lb (3.95 kg)19 mm (0.75 in)$287.00
SAPI LMulti curve10" x 13¼"10.00 lb (4.54 kg)19 mm (0.75 in)$310.00
SAPI XLMulti curve11" x 14"11.40 lb (5.17 kg)19 mm (0.75 in)Not listed

Weights and dimensions as HighCom publishes them; prices are HighCom’s own store prices. Shooter and swimmer 8×10 and 10×12 sizes are often nominal, so each is compared with this plate's own SAPI S or M weight.

Rounds tested, as listed by HighCom

RoundStandardGrainsVelocity
.30 Caliber Armor Piercing (AP) Bullets (M2 AP)NIJ 2005 IR1662880 ft/s (+/- 30 fps)
.223 Remington Tactical Bonded Soft PointDEA 2017622600 ft/s (+/- 50 fps)
5.56 x 45mm M855 (Green Tip)DEA 2017623100 ft/s (+/- 50 fps)
7.62 x 39mm Mild Steel CoreDEA 20171232400 ft/s (+/- 50 fps)
7.62 mm FMJ, Steel Jacketed Bullets (M80)DEA 20171472750 ft/s (+/- 50 fps)
.308 Winchester PSPB Core-Lokt Ultra BondedDEA 20171502600 ft/s (+/- 50 fps)

A round that isn’t listed isn’t necessarily one the plate fails; it means no source says.

All specs

Protection

Protection (as published)
Level IV stand alone
NIJ standard
0101.04
NIJ level
IV
Stand-alone or ICW
stand-alone
Worn with (ICW)
Not published
Special-threat plate
no
Female-specific model
no
Multi-hit
Not published

Certification

NIJ certified (CPL)
Not on NIJ CPL
CPL standard
Not published
CPL model designation
Not published
CPL checked
Nov 10, 2026
Maker's test claim
The 4sas7 is certified compliant by NIJ to NIJ Standard 0101.04 (2005IR).
Other certifications
Hard Armor Protocol Compliant (per HighCom)

Construction

Plate type
ceramic composite
Strike face
Ceramic
Backer
PE
Construction / process
Ceramic strike face composite backing
Edge-to-edge protection
not stated
Drop protection
not stated
Drop protection (basis, as published)
Not published
Cover
1000D CORDURA, textured nylon
Thickness (as published)
0.75” ("Thinness" on HighCom's spec list)
Areal density (as published)
Not published
Weight tolerance
Not published
Buoyancy
Not published

Availability and sources

Status
current
Availability (source wording)
Sold on HighCom's own US web store.
Product line
Icon Range
Warranty
5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship
Country
Not published
Origin
United States (where the maker is based)
Data source
Manufacturer (and other official sources)
Primary source
highcomarmor.com
Second source
None
Last checked
Nov 10, 2026
Notes and source conflicts
NIJ 0101.04 (2005 Interim Requirements) is an older standard. The current CPL has no 4sas7 listing; it lists two older HighCom Level IV plates (4SAS-15 and Guardian 4SAS-12), both Inactive. The SAPI rows on the size table don't name sizes; XS–XL are inferred from the standard SAPI dimensions. The product summary says "PE backing"; the spec list says "composite backing".

“Not published” means we couldn’t find a public number, not that the feature is missing. Manufacturer claims can be wrong; confirm them with an independent source to be sure. Spotted an error? Report a correction.

Compare side by side