PRIME Armor

NIJ Level III (RF1) Model 3803 (3.0 Lightweight Edition)

NIJ Level III (RF1); Stops 7.62x51 M80, 7.62x39 MSC, 5.56 M193

The PRIME Armor NIJ Level III (RF1) Model 3803 (3.0 Lightweight Edition) is an RF1 stand-alone polyethylene plate.

Curvature not stated.

We found no listing for it on NIJ's Compliant Products List; its maker's test claim is quoted below.

Its maker lists 4 rounds tested, including 7.62×51 M80 ball, 5.56×45 M193 and 7.62×39 mild steel core.

PRIME Armor lists it from $495.00 to $695.00 depending on size.

NIJ level
RF1
Curvature
Curvature not stated
Fit
Unisex
Wear
Stand-alone
NIJ certified
Not on NIJ CPL
Price
$495.00–$695.00

NIJ certification

We found no listing for this plate on NIJ’s Compliant Products List. Checked Nov 12, 2026 against the NIJ CPL.

What PRIME Armor says:

This plate has been tested according to NIJ 0101.06 and 01.01.07 standards

NIJ suspensions and removals

No NIJ advisory or safety notice names this model. Checked Nov 12, 2026 against NIJ’s notices.

NIJ publishes a notice when it suspends a model from the Compliant Products List or removes it permanently. A closed notice means NIJ finished the review; “CPL today” is the noticed model’s status in our Nov 12, 2026 snapshot of the list.

Sizes, weights and prices

SizeDimensionsWeightThicknessPrice
10 × 12 otherCurvature not stated10"x12"2.40 lb (1.09 kg)24 mm (0.95 in)$500.00
SAPI SCurvature not stated8.75"x11.75"Not published24 mm (0.95 in)$495.00
SAPI MCurvature not stated9.5"x12.5"Not published24 mm (0.95 in)$500.00
SAPI LCurvature not stated10.25"x13.25"Not published24 mm (0.95 in)$595.00
SAPI XLCurvature not stated11"x14"Not published24 mm (0.95 in)$695.00

Weights and dimensions as PRIME Armor publishes them; prices are PRIME Armor’s own store prices.

Rounds tested, as listed by PRIME Armor

RoundStandardGrainsVelocity
7.62x51 M80 [147 GR FMJ] AT 2845 FPSMaker—2845 ft/s
7.62x51 NATO [175 GR HP] AT 2530 FPSMaker—2530 ft/s
5.56x45 M193 [55GR FMJ] AT 3215 FPSMaker—3215 ft/s
7.62x39 [124 GR MSC] AT 2435 FPSMaker—2435 ft/s
7.62x39 [124 GR FMJ] AT 2430 FPSMaker—2430 ft/s

A round that isn’t listed isn’t necessarily one the plate fails; it means no source says.

All specs

Protection

Protection (as published)
NIJ Level III (RF1); Stops 7.62x51 M80, 7.62x39 MSC, 5.56 M193
NIJ standard
Not published
NIJ level
RF1
Stand-alone or ICW
stand-alone
Worn with (ICW)
Not published
Special-threat plate
no
Female-specific model
no
Multi-hit
Level III rated stop 6 shots

Certification

NIJ certified (CPL)
Not on NIJ CPL
CPL standard
Not published
CPL model designation
Not published
CPL checked
Nov 12, 2026
Maker's test claim
This plate has been tested according to NIJ 0101.06 and 01.01.07 standards
Other certifications
Not published

Construction

Plate type
polyethylene
Strike face
Not published
Backer
Not published
Construction / process
UHMWPE ballistic core construction
Edge-to-edge protection
not stated
Drop protection
not stated
Drop protection (basis, as published)
Not published
Cover
Polyurea or cordura 1000D coating
Thickness (as published)
0.95” Thick Profile
Areal density (as published)
Not published
Weight tolerance
Not published
Buoyancy
positive

Availability and sources

Status
current
Availability (source wording)
Sold on PRIME Armor's own web store (prices per plate unless noted).
Product line
Not published
Warranty
10 years warranty for Ballistic Components
Country
Made in Texas / MADE IN THE USA
Origin
United States (made there)
Data source
Manufacturer (and other official sources)
Primary source
primearmor.us
Second source
None
Last checked
Nov 12, 2026
Notes and source conflicts
From PRIME Armor's product page. Sources disagree within the page: "0.95” Thick Profile" and "a profile of 1” thick"; "Multicurve" and "an ergonomic single curve", so curvature is recorded as not stated. Weight is published for the 10x12 LE cut only. 6x6 side plates (set of two) are $435. Not on NIJ's CPL.

“Not published” means we couldn’t find a public number, not that the feature is missing. Manufacturer claims can be wrong; confirm them with an independent source to be sure. Spotted an error? Report a correction.

Compare side by side