RMA Armament
1165 Gen2
Stand Alone Level 4/RF3 Armor, multi-hit · Level IV
The RMA Armament 1165 Gen2 is an RF3 stand-alone ceramic composite plate.
Curvature: multi curve.
We found no listing for it on NIJ's Compliant Products List; its maker's test claim is quoted below.
In SAPI M it weighs 6.10 lb (2.77 kg).
Its maker lists 1 round tested, including .30-06 M2 AP.
RMA Armament lists it from $299.99 to $349.99 depending on size.
- NIJ level
- RF3
- Curvature
- Multi curve
- Fit
- Unisex
- Wear
- Stand-alone
- NIJ certified
- Not on NIJ CPL
- Price
- $299.99–$349.99
- Independent tests
- 1 by Buffman RANGE
NIJ certification
We found no listing for this plate on NIJ’s Compliant Products List. Checked Nov 11, 2026 against the NIJ CPL.
What RMA Armament says:
NIJ 0101.07 Tested ("Level IV/RF3? Check.")
NIJ suspensions and removals
No NIJ advisory or safety notice names this model. Checked Nov 12, 2026 against NIJ’s notices.
NIJ publishes a notice when it suspends a model from the Compliant Products List or removes it permanently. A closed notice means NIJ finished the review; “CPL today” is the noticed model’s status in our Nov 12, 2026 snapshot of the list.
Sizes, weights and prices
| Size | Dimensions | Weight | Thickness | Price |
|---|---|---|---|---|
| 10 × 12 shooters | 10″x12″ (9.5″X11.5″ Nominal Shooter's Cut) | 5.30 lb (2.40 kg)13% lighter than SAPI M · likely undersized | 20 mm (0.80 in) | $299.99 |
| SAPI M | 9.5″x12.5″ (SAPI Cut) | 6.10 lb (2.77 kg) | 20 mm (0.80 in) | $299.99 |
| SAPI XL | 11×14 (XL SAPI) | 8.30 lb (3.77 kg) | 20 mm (0.80 in) | $349.99 |
Weights and dimensions as RMA Armament publishes them; prices are RMA Armament’s own store prices. Shooter and swimmer 8×10 and 10×12 sizes are often nominal, so each is compared with this plate's own SAPI S or M weight.
Rounds tested, as listed by RMA Armament
| Round | Standard | Grains | Velocity |
|---|---|---|---|
| Level IV/RF3 (30-06 M2AP) | — | Not published |
A round that isn’t listed isn’t necessarily one the plate fails; it means no source says.
Independent tests by Buffman RANGE
Results from Buffman RANGE’s own range tests, used with his permission. This is not NIJ testing, and we haven’t verified it.
RMA 1165 Generation 2 NIJ 07 RF3 / Level IV - Lightweight
Source: Buffman RANGE’s test videos and test summary spreadsheet, used with permission. “His threat class” is his own label for the round, not an NIJ result; this plate’s NIJ certification is shown above, from NIJ’s Compliant Products List.
All specs
Protection
- Protection (as published)
- Stand Alone Level 4/RF3 Armor, multi-hit
- NIJ standard
- 0101.07
- NIJ level
- RF3
- Stand-alone or ICW
- stand-alone
- Worn with (ICW)
- Not published
- Special-threat plate
- no
- Female-specific model
- no
- Multi-hit
- multi-hit
Certification
- NIJ certified (CPL)
- Not on NIJ CPL
- CPL standard
- Not published
- CPL model designation
- Not published
- CPL checked
- Nov 11, 2026
- Maker's test claim
- NIJ 0101.07 Tested ("Level IV/RF3? Check.")
- Other certifications
- Not published
Construction
- Plate type
- ceramic composite
- Strike face
- 99.7% HyPure Alumina Oxide Ceramic
- Backer
- Dyneema® UHMWPE
- Construction / process
- 99.7% HyPure Alumina Oxide Ceramic & Dyneema® UHMWPE
- Edge-to-edge protection
- yes
- Drop protection
- not stated
- Drop protection (basis, as published)
- Not published
- Cover
- 600 Denier Water Resistant Cover
- Thickness (as published)
- 0.8″ (spec list; the product summary says "0.7″ thin")
- Areal density (as published)
- Not published
- Weight tolerance
- +/- 0.125 lb
- Buoyancy
- Not published
Availability and sources
- Status
- current
- Availability (source wording)
- Sold on RMA's own US web store.
- Product line
- Level IV
- Warranty
- 10 Year Manufacturer's Warranty
- Country
- USA (Centerville, Iowa)
- Origin
- United States (where the maker is based)
- Data source
- Manufacturer (and other official sources)
- Primary source
- rmadefense.com
- Second source
- None
- Last checked
- Nov 11, 2026
- Notes and source conflicts
- Sources disagree on thickness: RMA's spec list says 0.8″ while the same page's summary says "0.7″ thin"; the spec list value is used. Not on NIJ's CPL. Prices are RMA's store prices per plate.
“Not published” means we couldn’t find a public number, not that the feature is missing. Manufacturer claims can be wrong; confirm them with an independent source to be sure. Spotted an error? Report a correction.