TenCate Advanced Armor
CR3200SA
Level III, NIJ 0101.06 · Stand Alone · Cratus
The TenCate Advanced Armor CR3200SA is a Level III stand-alone ceramic composite plate.
Curvature: single or multi curve.
It is certified to NIJ 0101.06: an active listing on NIJ's Compliant Products List (D2332).
In SAPI M it weighs 5.20 lb (2.36 kg).
Its maker lists 3 rounds tested, including 7.62×51 M80 ball, 7.62×39 mild steel core and 5.56×45 M855 (green tip).
TenCate Advanced Armor doesn't publish a price for it.
- NIJ level
- Level III
- Curvature
- Single or multi curve
- Fit
- Unisex
- Wear
- Stand-alone
- NIJ certified
- Certified, NIJ 0101.06
- Price
- Not published by manufacturer
NIJ certification
Listed as Active on NIJ’s Compliant Products List for NIJ 0101.06, as D2332. Checked Nov 11, 2026 against the NIJ CPL.
What TenCate Advanced Armor says:
Level III NIJ 0101.06 (sizes marked "NIJ Compliant" or "Independent" in the size table)
NIJ suspensions and removals
No NIJ advisory or safety notice names this model (or its CPL designation D2332). Checked Nov 12, 2026 against NIJ’s notices.
NIJ publishes a notice when it suspends a model from the Compliant Products List or removes it permanently. A closed notice means NIJ finished the review; “CPL today” is the noticed model’s status in our Nov 12, 2026 snapshot of the list.
Sizes, weights and prices
| Size | Dimensions | Weight | Thickness | Price |
|---|---|---|---|---|
| 6 × 6 full | 6" x 6" | 1.70 lb (0.77 kg) | 28 mm (1.10 in) | Not listed |
| 6 × 8 full | 6" x 8" | 2.20 lb (1.00 kg) | 28 mm (1.10 in) | Not listed |
| 7 × 8 full | 7" x 8" | 2.50 lb (1.13 kg) | 28 mm (1.10 in) | Not listed |
| 8 × 10 full | 8" x 10" | 3.80 lb (1.72 kg) | 28 mm (1.10 in) | Not listed |
| 8 × 10 other | 8" x 10" | 3.50 lb (1.59 kg) | 28 mm (1.10 in) | Not listed |
| 8 × 10 shooters | 8" x 10" | 3.30 lb (1.50 kg)27% lighter than SAPI S | 28 mm (1.10 in) | Not listed |
| 10 × 12 full | 10" x 12" | 6.00 lb (2.72 kg) | 28 mm (1.10 in) | Not listed |
| 10 × 12 other | 10" x 12" | 5.00 lb (2.27 kg) | 28 mm (1.10 in) | Not listed |
| 10 × 12 shooters | 10" x 12" | 4.80 lb (2.18 kg)8% lighter than SAPI M | 28 mm (1.10 in) | Not listed |
| SAPI XS | 7.25" x 11.50" | 3.60 lb (1.63 kg) | 28 mm (1.10 in) | Not listed |
| SAPI S | 8.75" x 11.75" | 4.50 lb (2.04 kg) | 28 mm (1.10 in) | Not listed |
| SAPI M | 9.50" x 12.50" | 5.20 lb (2.36 kg) | 28 mm (1.10 in) | Not listed |
| SAPI L | 10.25" x 13.25" | 6.10 lb (2.77 kg) | 28 mm (1.10 in) | Not listed |
| SAPI XL | 11.00" x 14.00" | 6.90 lb (3.13 kg) | 28 mm (1.10 in) | Not listed |
Weights and dimensions as TenCate Advanced Armor publishes them; prices are TenCate Advanced Armor’s own store prices. Shooter and swimmer 8×10 and 10×12 sizes are often nominal, so each is compared with this plate's own SAPI S or M weight.
Rounds tested, as listed by TenCate Advanced Armor
| Round | Standard | Grains | Velocity |
|---|---|---|---|
| 7.62x51 M80 (NIJ III) | NIJ | — | Not published |
| 7.62x39 PS BALL (MSC) | Special | — | Not published |
| 5.56x45 M855 (GREEN TIP) | Special | — | Not published |
A round that isn’t listed isn’t necessarily one the plate fails; it means no source says.
All specs
Protection
- Protection (as published)
- Level III, NIJ 0101.06 · Stand Alone
- NIJ standard
- 0101.06
- NIJ level
- III
- Stand-alone or ICW
- stand-alone
- Worn with (ICW)
- Not published
- Special-threat plate
- no
- Female-specific model
- no
- Multi-hit
- Multi-hit
Certification
- NIJ certified (CPL)
- Certified, NIJ 0101.06
- CPL standard
- 0101.06
- CPL model designation
- D2332
- CPL checked
- Nov 11, 2026
- Maker's test claim
- Level III NIJ 0101.06 (sizes marked "NIJ Compliant" or "Independent" in the size table)
- Other certifications
- Not published
Construction
- Plate type
- ceramic composite
- Strike face
- Not published
- Backer
- Not published
- Construction / process
- Ceramic/Composite
- Edge-to-edge protection
- not stated
- Drop protection
- not stated
- Drop protection (basis, as published)
- Not published
- Cover
- Polyurea
- Thickness (as published)
- 1.10" (polyurea cover)
- Areal density (as published)
- Not published
- Weight tolerance
- All size dimensions are ± 0.375". All weights are ± 4% or .50 lbs., whichever is greater
- Buoyancy
- Not published
Availability and sources
- Status
- Not published
- Availability (source wording)
- No store or prices; the data sheet gives a TenCate sales contact.
- Product line
- Cratus
- Warranty
- Sixty (60) months after the "date of issue" (TCAA Limited Warranty)
- Country
- Made in America
- Origin
- United States (made there)
- Data source
- Manufacturer (and other official sources)
- Primary source
- web.archive.org
- Second source
- None
- Last checked
- Nov 11, 2026
- Notes and source conflicts
- From TenCate Advanced Armor's own Cratus data sheet, archived from tencateadvancedarmor.com; TenCate designation D2332. Product application: External Carriers, Plate Carriers, and Tactical Body Armor. Weight reference: 4.75 lbs based on 10x12-SE. Curvature: Multi-curve (7 curvature). The data sheet is headed D2332 (Active on NIJ's 0101.06 CPL under TenCate Advanced Armor USA); its archived file name says D1557, which the CPL lists for TenCate as Inactive.
“Not published” means we couldn’t find a public number, not that the feature is missing. Manufacturer claims can be wrong; confirm them with an independent source to be sure. Spotted an error? Report a correction.