U.S. Army (PEO Soldier)
Enhanced Small Arms Protective Insert (ESAPI) Rev. G
ESAPI - Rev. G · ESAPI
Partly community resources
Partly community resources. Values marked (from community resources) come from community resources, not from the manufacturer, and have not been verified. They fill gaps only where the manufacturer publishes nothing.
The U.S. Army (PEO Soldier) Enhanced Small Arms Protective Insert (ESAPI) Rev. G is an ICW ceramic composite plate for special threats, worn with OTV / IOTV or SPCS soft armor.
Its published rating: “ESAPI - Rev. G”.
Where U.S. Army (PEO Soldier) publishes nothing, some specs come from community resources; those are marked and not verified.
Curvature not stated.
We found no listing for it on NIJ's Compliant Products List.
In SAPI M it weighs 5.45 lb (2.47 kg).
Its sources list 1 round tested, including .30-06 M2 AP.
U.S. Army (PEO Soldier) doesn't publish a price for it.
- NIJ level
- No NIJ level
- Curvature
- Curvature not stated
- Fit
- Unisex
- Wear
- ICW (with soft armor)
- NIJ certified
- Not on NIJ CPL
- Price
- Not published by manufacturer
NIJ certification
We found no listing for this plate on NIJ’s Compliant Products List. Checked Nov 12, 2026 against the NIJ CPL.
NIJ suspensions and removals
No NIJ advisory or safety notice names this model. Checked Nov 12, 2026 against NIJ’s notices.
NIJ publishes a notice when it suspends a model from the Compliant Products List or removes it permanently. A closed notice means NIJ finished the review; “CPL today” is the noticed model’s status in our Nov 12, 2026 snapshot of the list.
Sizes, weights and prices
| Size | Dimensions | Weight | Thickness | Price |
|---|---|---|---|---|
| SAPI XS | Not published | 3.80 lb (1.72 kg) | Not published | Not listed |
| SAPI S | Not published | 4.75 lb (2.15 kg) | Not published | Not listed |
| SAPI M | Not published | 5.45 lb (2.47 kg) | Not published | Not listed |
| SAPI L | Not published | 6.25 lb (2.83 kg) | Not published | Not listed |
| SAPI XL | Not published | 7.10 lb (3.22 kg) | Not published | Not listed |
Weights and dimensions as U.S. Army (PEO Soldier) publishes them, except values marked (from community resources), which come from community resources and are not verified; prices are U.S. Army (PEO Soldier)’s own store prices.
Rounds tested, as listed by the sources below
| Round | Standard | Grains | Velocity |
|---|---|---|---|
| 3x .30-06 M2AP at 2,850 FPS (REV. G or later) (from community resources) | — | 2850 ft/s | |
| 3x 5.56x45mm M995 at 3,350ft/s (REV. G or later only) (from community resources) | — | 3350 ft/s |
A round that isn’t listed isn’t necessarily one the plate fails; it means no source says. Rounds marked (from community resources) come from community resources, not from U.S. Army (PEO Soldier), and are not verified.
All specs
Protection
- Protection (as published)
- ESAPI - Rev. G
- NIJ standard
- Not published
- NIJ level
- No NIJ level
- Stand-alone or ICW
- icw
- Worn with (ICW)
- OTV / IOTV or SPCS soft armor
- Special-threat plate
- yes
- Female-specific model
- no
- Multi-hit
- Not published
Certification
- NIJ certified (CPL)
- Not on NIJ CPL
- CPL standard
- Not published
- CPL model designation
- Not published
- CPL checked
- Nov 12, 2026
- Maker's test claim
- Not published
- Other certifications
- Not published
Construction
- Plate type
- ceramic composite
- Strike face
- Not published
- Backer
- Not published
- Construction / process
- Not published
- Edge-to-edge protection
- not stated
- Drop protection
- yes
- Drop protection (basis, as published)
- The ESAPI will be able to withstand two drops using a moment arm fixture at a height of 48.0-inches onto a concrete surface without any detrimental effects to ballistic performance
- Cover
- Foliage Green 504
- Thickness (as published)
- Not published
- Areal density (as published)
- Not published
- Weight tolerance
- Not published
- Buoyancy
- Not published
Availability and sources
- Status
- Not published
- Availability (source wording)
- Not published
- Product line
- ESAPI
- Warranty
- Not published
- Country
- Not published
- Origin
- United States (where the maker is based)
- Data source
- Manufacturer, with gaps filled from community resources (marked C)
- Primary source
- ciehub.info
- Second source
- ciehub.info
- Last checked
- Nov 12, 2026
- Notes and source conflicts
- From the Army's ESAPI purchase description CO/PD 04-19H (4 March 2013), which requires the back-face marking "ESAPI - Rev. G". Its threats are in a classified enclosure; the rounds below are from community resources. Weights are the purchase description's maximum ("will not exceed") weights per size, not measured weights; for Rev. G/C both the threshold and the 10% lighter objective maximum are given. Copies of the Army purchase descriptions are hosted by CIE Hub. Community resources say ESAPIs come in green or black (blue ones are overweight "Heavy ESAPIs"), that the revision is marked below "TOP" or on the bottom label, that Rev. J adds a first-shot V50 of 3,000 ft/s against M2AP, and that ESAPI is at least on Rev. J as of 2024. Not on NIJ's CPL.
“Not published” means we couldn’t find a public number, not that the feature is missing. Manufacturer claims can be wrong; confirm them with an independent source to be sure. Spotted an error? Report a correction.