HighCom 4s16 vs HighCom 4s17m

Full pages: 4s16 · 4s17m · open in the interactive comparator

HighCom 4s16 Level IV Stand Alone

The HighCom 4s16 is a Level IV stand-alone ceramic composite plate.

Curvature: single or multi curve.

We found no listing for it on NIJ's Compliant Products List; its maker's test claim is quoted below.

In SAPI M it weighs 7.31 lb (3.32 kg).

Its maker lists 1 round tested, including .30-06 M2 AP.

HighCom lists it from $275.00 to $528.00 depending on size.

HighCom 4s17m Level IV stand alone

The HighCom 4s17m is a Level IV stand-alone ceramic composite plate.

Curvature: multi curve.

It is certified to NIJ 0101.06: an active listing on NIJ's Compliant Products List (4S17M).

In SAPI M it weighs 8.60 lb (3.90 kg).

Its maker lists 16 rounds tested, including .30-06 M2 AP, .223 Tactical Bonded Soft Point and 5.56×45 M855 (green tip).

HighCom lists it from $275.00 to $310.00 depending on size.

SpecHighCom 4s16HighCom 4s17m
Weight and price by size
SAPI XS4.91 lb (2.23 kg)6.00 lb (2.72 kg)
SAPI S6.31 lb (2.86 kg)$459.007.40 lb (3.36 kg)$275.00
SAPI M7.31 lb (3.32 kg)$494.008.60 lb (3.90 kg)$287.00
SAPI L8.38 lb (3.80 kg)$528.009.90 lb (4.49 kg)$310.00
SAPI XL9.24 lb (4.19 kg)11.30 lb (5.13 kg)
10 × 12 shooters6.46 lb (2.93 kg)$471.007.20 lb (3.27 kg)$275.00
8 × 10 shooters5.00 lb (2.27 kg)Not made in this size
10 × 12 swimmers6.61 lb (3.00 kg)Not made in this size
10 × 12 full7.64 lb (3.46 kg)Not made in this size
8 × 10 full5.14 lb (2.33 kg)Not made in this size
6 × 8 full3.09 lb (1.40 kg)Not made in this size
5 × 8 full2.65 lb (1.20 kg)Not made in this size
6 × 6 full2.20 lb (1.00 kg)$275.00Not made in this size
5 × 7 full2.31 lb (1.05 kg)Not made in this size
Rounds listed
5.56×45 M193Not listedListed
5.56×45 M855 (green tip)Not listedListed
5.56×45 M855A1Not listedListed
.223 Tactical Bonded Soft PointNot listedListed
.223 SCS Brush HogNot listedListed
7.62×51 M80 ballNot listedListed
.308 bonded soft pointNot listedListed
7.62×51 M61 APNot listedListed
7.62×39 mild steel coreNot listedListed
7.62×39 ballNot listedListed
7.62×39 BZ APINot listedListed
7.62×54R LPSNot listedListed
7.62×54R B-32 APINot listedListed
.30-06 / 7.62×63 JSPNot listedListed
.30-06 M2 APListedListed
12 ga slugNot listedListed
Protection
Protection (as published)Level IV Stand AloneLevel IV stand alone
NIJ standard0101.060101.06
NIJ levelIVIV
Stand-alone or ICWstand-alonestand-alone
Worn with (ICW)Not publishedNot published
Special-threat platenono
Female-specific modelnono
Multi-hitNot publishedNot published
Certification
NIJ certified (CPL)Not on NIJ CPLCertified, NIJ 0101.06
CPL standardNot published0101.06
CPL model designationNot published4S17M
CPL checked2026-11-102026-11-10
Maker's test claimThe 4s16 has been independently tested by an NVLAP accredited laboratory according to NIJ Standard 0101.06 level IV ballistic threats.The 4s17m is DEA compliant and is NIJ 0101.06 compliant "Certified" by NIJ and can be found listed on the NIJ's CPL (Compliant Product List).
Other certificationsNot publishedDEA compliant; Hard Armor Protocol Compliant (per HighCom)
Construction
Plate typeceramic compositeceramic composite
Strike faceCeramicCeramic
BackerUHMWPEPE
Construction / processCeramic + UHMWPECeramic strike face composite backing
Edge-to-edge protectionnot statednot stated
Drop protectionnot statednot stated
Drop protection (basis, as published)Not publishedNot published
Cover1000D CORDURA, textured nylon1000D CORDURA, textured nylon
Thickness (as published)0.75” ("Thinness" on HighCom's spec list)0.95” ("Thinness" on HighCom's spec list)
Areal density (as published)Not publishedNot published
Weight toleranceNot publishedNot published
BuoyancyNot publishedNot published
Availability and sources
Statuscurrentcurrent
Availability (source wording)Sold on HighCom's own US web store.Sold on HighCom's own US web store.
Product lineIcon RangeIcon Range
Warranty5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship10 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship
CountryMade in the USANot published
OriginUnited States (made there)United States (where the maker is based)
Data sourceManufacturer (and other official sources)Manufacturer (and other official sources)
Primary sourcehighcomarmor.comhighcomarmor.com
Second sourceNot publishedNot published
Last checked2026-11-102026-11-10
Notes and source conflictsNot publishedSources disagree: the product summary says "PE backing"; the spec list says "composite backing".

“Not published” means we couldn’t find a public number. A round that isn’t listed isn’t necessarily one the plate fails. Values marked (from community resources) come from community resources, not the manufacturer, and are not verified. Manufacturer claims can be wrong; confirm them with an independent source to be sure.