HighCom

4s16

Level IV Stand Alone · Icon Range

The HighCom 4s16 is a Level IV stand-alone ceramic composite plate.

Curvature: single or multi curve.

We found no listing for it on NIJ's Compliant Products List; its maker's test claim is quoted below.

In SAPI M it weighs 7.31 lb (3.32 kg).

Its maker lists 1 round tested, including .30-06 M2 AP.

HighCom lists it from $275.00 to $528.00 depending on size.

NIJ level
Level IV
Curvature
Single or multi curve
Fit
Unisex
Wear
Stand-alone
NIJ certified
Not on NIJ CPL
Price
$275.00–$528.00

NIJ certification

We found no listing for this plate on NIJ’s Compliant Products List. Checked Nov 10, 2026 against the NIJ CPL.

What HighCom says:

The 4s16 has been independently tested by an NVLAP accredited laboratory according to NIJ Standard 0101.06 level IV ballistic threats.

NIJ suspensions and removals

No NIJ advisory or safety notice names this model. Checked Nov 12, 2026 against NIJ’s notices.

NIJ publishes a notice when it suspends a model from the Compliant Products List or removes it permanently. A closed notice means NIJ finished the review; “CPL today” is the noticed model’s status in our Nov 12, 2026 snapshot of the list.

Sizes, weights and prices

SizeDimensionsWeightThicknessPrice
5 × 7 fullSingle curve5 x 7 in2.31 lb (1.05 kg)19 mm (0.75 in)Not listed
5 × 8 fullSingle curve5 x 8 in2.65 lb (1.20 kg)19 mm (0.75 in)Not listed
6 × 6 fullSingle curve6 x 6 in2.20 lb (1.00 kg)19 mm (0.75 in)$275.00
6 × 8 fullSingle curve6 x 8 in3.09 lb (1.40 kg)19 mm (0.75 in)Not listed
8 × 10 fullSingle curve8 x 10 in5.14 lb (2.33 kg)19 mm (0.75 in)Not listed
8 × 10 shootersSingle curve8 x 10 in5.00 lb (2.27 kg)21% lighter than SAPI S19 mm (0.75 in)Not listed
10 × 12 fullSingle curve10 x 12 in7.64 lb (3.46 kg)19 mm (0.75 in)Not listed
10 × 12 shootersSingle curve10 x 12 in6.46 lb (2.93 kg)12% lighter than SAPI M · likely undersized19 mm (0.75 in)Not listed
10 × 12 swimmersSingle curve10 x 12 in6.61 lb (3.00 kg)10% lighter than SAPI M · likely undersized19 mm (0.75 in)Not listed
10 × 12 shootersMulti curve10 x 12 in6.46 lb (2.93 kg)12% lighter than SAPI M · likely undersized19 mm (0.75 in)$471.00
SAPI XSMulti curve7¼ x 11½ in4.91 lb (2.23 kg)19 mm (0.75 in)Not listed
SAPI SMulti curve8¾ x 11¾ in6.31 lb (2.86 kg)19 mm (0.75 in)$459.00
SAPI MMulti curve9½ x 12½ in7.31 lb (3.32 kg)19 mm (0.75 in)$494.00
SAPI LMulti curve10 x 13¼ in8.38 lb (3.80 kg)19 mm (0.75 in)$528.00
SAPI XLMulti curve11 x 14 in9.24 lb (4.19 kg)19 mm (0.75 in)Not listed

Weights and dimensions as HighCom publishes them; prices are HighCom’s own store prices. Shooter and swimmer 8×10 and 10×12 sizes are often nominal, so each is compared with this plate's own SAPI S or M weight.

Rounds tested, as listed by HighCom

RoundStandardGrainsVelocity
.30 Caliber Armor Piercing (AP) Bullets (M2 AP)NIJ 0101.061662880 ft/s (+/- 30)

A round that isn’t listed isn’t necessarily one the plate fails; it means no source says.

All specs

Protection

Protection (as published)
Level IV Stand Alone
NIJ standard
0101.06
NIJ level
IV
Stand-alone or ICW
stand-alone
Worn with (ICW)
Not published
Special-threat plate
no
Female-specific model
no
Multi-hit
Not published

Certification

NIJ certified (CPL)
Not on NIJ CPL
CPL standard
Not published
CPL model designation
Not published
CPL checked
Nov 10, 2026
Maker's test claim
The 4s16 has been independently tested by an NVLAP accredited laboratory according to NIJ Standard 0101.06 level IV ballistic threats.
Other certifications
Not published

Construction

Plate type
ceramic composite
Strike face
Ceramic
Backer
UHMWPE
Construction / process
Ceramic + UHMWPE
Edge-to-edge protection
not stated
Drop protection
not stated
Drop protection (basis, as published)
Not published
Cover
1000D CORDURA, textured nylon
Thickness (as published)
0.75” ("Thinness" on HighCom's spec list)
Areal density (as published)
Not published
Weight tolerance
Not published
Buoyancy
Not published

Availability and sources

Status
current
Availability (source wording)
Sold on HighCom's own US web store.
Product line
Icon Range
Warranty
5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship
Country
Made in the USA
Origin
United States (made there)
Data source
Manufacturer (and other official sources)
Primary source
highcomarmor.com
Second source
None
Last checked
Nov 10, 2026
Notes and source conflicts
Not published

“Not published” means we couldn’t find a public number, not that the feature is missing. Manufacturer claims can be wrong; confirm them with an independent source to be sure. Spotted an error? Report a correction.

Compare side by side