HighCom

Guardian 3i6

Level III High Velocity Rifle Rounds ICW IIIA Soft Armor · Guardian · Discontinued

The HighCom Guardian 3i6 is a Level III ICW polyethylene plate, worn with Level IIIA soft armor.

It has been discontinued by HighCom.

Curvature: single or multi curve.

We found no listing for it on NIJ's Compliant Products List; its maker's test claim is quoted below.

In SAPI M it weighs 3.30 lb (1.50 kg).

Its maker lists 2 rounds tested, including 7.62×51 M80 ball and 5.56×45 M193.

HighCom doesn't publish a price for it.

NIJ level
Level III
Curvature
Single or multi curve
Fit
Unisex
Wear
ICW (with soft armor)
NIJ certified
Not on NIJ CPL
Price
Not published by manufacturer

NIJ certification

We found no listing for this plate on NIJ’s Compliant Products List. Checked Nov 10, 2026 against the NIJ CPL.

What HighCom says:

NIJ Standard 0101.06 TESTED: This product has been independently tested by an NVLAP accredited NIJ approved laboratory to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06.

NIJ suspensions and removals

No NIJ advisory or safety notice names this model. Checked Nov 12, 2026 against NIJ’s notices.

NIJ publishes a notice when it suspends a model from the Compliant Products List or removes it permanently. A closed notice means NIJ finished the review; “CPL today” is the noticed model’s status in our Nov 12, 2026 snapshot of the list.

Sizes, weights and prices

SizeDimensionsWeightThicknessPrice
5 × 7 fullSingle curve5 x 7 in1.00 lb (0.45 kg)25 mm (1.00 in)Not listed
5 × 8 fullSingle curve5 x 8 in1.20 lb (0.54 kg)25 mm (1.00 in)Not listed
6 × 6 fullSingle curve6 x 6 in1.00 lb (0.45 kg)25 mm (1.00 in)Not listed
6 × 8 fullSingle curve6 x 8 in1.40 lb (0.64 kg)25 mm (1.00 in)Not listed
8 × 10 fullSingle curve8 x 10 in2.30 lb (1.04 kg)25 mm (1.00 in)Not listed
8 × 10 shootersSingle curve8 x 10 in2.20 lb (1.00 kg)21% lighter than SAPI S25 mm (1.00 in)Not listed
10 × 12 fullSingle curve10 x 12 in3.40 lb (1.54 kg)25 mm (1.00 in)Not listed
10 × 12 shootersSingle curve10 x 12 in2.90 lb (1.31 kg)12% lighter than SAPI M · likely undersized25 mm (1.00 in)Not listed
10 × 12 swimmersSingle curve10 x 12 in3.10 lb (1.41 kg)6% lighter than SAPI M25 mm (1.00 in)Not listed
10 × 12 shootersMulti curve10 x 12 in2.90 lb (1.31 kg)12% lighter than SAPI M · likely undersized25 mm (1.00 in)Not listed
SAPI XSMulti curve7.25 x 11.5 in2.20 lb (1.00 kg)25 mm (1.00 in)Not listed
SAPI SMulti curve8.75 x 11.75 in2.80 lb (1.27 kg)25 mm (1.00 in)Not listed
SAPI MMulti curve9.5 x 12.5 in3.30 lb (1.50 kg)25 mm (1.00 in)Not listed
SAPI LMulti curve10 x 13.25 in3.80 lb (1.72 kg)25 mm (1.00 in)Not listed
SAPI XLMulti curve11 x 14 in4.10 lb (1.86 kg)25 mm (1.00 in)Not listed

Weights and dimensions as HighCom publishes them; prices are HighCom’s own store prices. Shooter and swimmer 8×10 and 10×12 sizes are often nominal, so each is compared with this plate's own SAPI S or M weight. This plate is discontinued, so no current price is shown.

Rounds tested, as listed by HighCom

RoundStandardGrainsVelocity
7.62 x 51 mm -M80 (NIJ06)—2780 ft/s (+/- 30)
7.62 x 39 mm -Ball—2380 ft/s (+/- 30)
5.56 x 45 mm -M193—3150 ft/s (+/- 30)

A round that isn’t listed isn’t necessarily one the plate fails; it means no source says.

All specs

Protection

Protection (as published)
Level III High Velocity Rifle Rounds ICW IIIA Soft Armor
NIJ standard
0101.06
NIJ level
III
Stand-alone or ICW
icw
Worn with (ICW)
Level IIIA soft armor
Special-threat plate
no
Female-specific model
no
Multi-hit
Not published

Certification

NIJ certified (CPL)
Not on NIJ CPL
CPL standard
Not published
CPL model designation
Not published
CPL checked
Nov 10, 2026
Maker's test claim
NIJ Standard 0101.06 TESTED: This product has been independently tested by an NVLAP accredited NIJ approved laboratory to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06.
Other certifications
Not published

Construction

Plate type
polyethylene
Strike face
UHMWPE
Backer
Not published
Construction / process
Super Lightweight UHMWPE based plate
Edge-to-edge protection
not stated
Drop protection
not stated
Drop protection (basis, as published)
Not published
Cover
1000D Cordura, textured nylon
Thickness (as published)
1” ("Thinness" on HighCom's spec list)
Areal density (as published)
Not published
Weight tolerance
Not published
Buoyancy
Not published

Availability and sources

Status
discontinued
Availability (source wording)
Was sold on HighCom's own US web store; no longer listed.
Product line
Guardian
Warranty
5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship
Country
Not published
Origin
United States (where the maker is based)
Data source
Manufacturer (and other official sources)
Primary source
web.archive.org
Second source
None
Last checked
Nov 10, 2026
Notes and source conflicts
Discontinued: no longer on HighCom's site; specs are from HighCom's own page as archived on 2020-10-26. No current price.

“Not published” means we couldn’t find a public number, not that the feature is missing. Manufacturer claims can be wrong; confirm them with an independent source to be sure. Spotted an error? Report a correction.

Compare side by side